点击图片查看原图
- 产品品牌：泰克Thoo
- 产品型号：TDP0500
本公司供应泰克TDP0500高压差分探头质量保证，欢迎咨询洽谈。
Features & BenefitsOutstanding Electrical Performance1 GHz and 500 MHz Probe Bandwidth<1 pF Differential Input CaPACitance1 MΩ Differential Input Resistance±42 V (DC + pk AC) Differential Input Voltage>18 dB CMRR (at 250 MHz 50x attenuation)Selectable Bandwidth-limiting FiltersDC RejectVersatile DUT ConnectivitySmall Compact Probe Head for Probing Small Geometry Circuit ElementsStraight Pin, Square Pin, Solder Down, Variable Pitch Standard AccessoriesRobust Design for ReliabilityEasy to UseProvides Automatic Units Scaling and Readout on the Oscilloscope DisplayTDP1000, TDP0500 Connect Directly to the DPO7000, DPO4000, and MSO4000 Series Oscilloscopes Using TekVPI™ Probe Interface (No additional power adapters required)Easy Access to Scope-displayed Probe Menu for Probe Setup Control and Operating Status InformationAutoZero – Zeros Out Output OffsetP6251, P6250 Connect Directly to TDS5000 and other TekProbe™ Interface Oscilloscopes, or to TekConnect® Oscilloscopes Using TCA-BNC AdapterApplicationsHigh-speed Switch Mode Power Supply DesignCAN/LIN Bus DesignHigh-speed Digital DesignDigital Design and CharacterizationManufacturing Engineering TestResearch and Development
The TDP1000, TDP0500, P6251, and P6250 High-voltage Differential Probes provide excellent high-speed electrical and mechanical performance required for today’s Switch Mode Power Supply (SMPS), CAN/LIN Bus, and high-speed digital system designs.
Specifically designed for use with and direct connection to Tektronix oscilloscopes with either the TekVPI™ probe interface, or TekProbe BNC Interface. The TDP1000, TDP0500, P6251, and P6250 High-voltage Differential Probes achieve high-speed signal acquisition and measurement fidelity by solving three traditional measurement challenges:
Outstanding Electrical PerformanceVersatile Device-Under-Test ConnectivityEase of UseCharacteristics
Characteristic | Description |
|---|---|
Bandwidth (Probe only) | 1 GHz (TDP1000, P6251) 500 MHz (TDP0500, P6250) |
Attenuation | 5x, 50x |
Rise Time (Probe only) | ≤350 ps (TDP1000, P6251) <700 ps (TDP0500, P6250) |
Differential Input Capacitance | <1 pF |
Differential Input Resistance | 1 MΩ |
CMRR | >55 dB at 30 kHz >50 dB at 1 MHz >18 dB at 250 MHz (warranted at 50x attenuation) |
Sensitivity/Noise Level | 2 mVRMS (5x attenuation) 1 mVRMS (50x attenuation) referred to the probe output 10 mVRMS (5x attenuation) 50 mVRMS (50x attenuation) referred to the probe input |
Differential Mode Input Voltage | ±42 V (DC + pk AC); 30 VRMS |
Common Mode Input Voltage | ±35 V (DC + pk AC); 25 VRMS |
Input Offset Range | |
TDP1000, TDP0500 | ±42 V (5x or 50x attenuation) |
P6251, P6250 | ±4.25 V (5x attenuation) ±42 V (50x attenuation) |
Max Input Voltage (Nondestruct) | ±100 V (DC + pk AC) |
Selectable Bandwidth Filter Limits | |
TDP1000, TDP0500 | 100 Hz, 10 kHz, 1 MHz, Full |
P6251, P6250 | 5 MHz, Full |
DC Reject | 0.4 Hz (5x) 4 Hz (50x) |
Gain Accuracy at DC | ±2% |
Propagation Delay | 6.5 ns |
Scope Interface | |
TDP1000, TDP0500 | TekVPI™ Probe Interface |
P6251, P6250 | TekProbe BNC Level II Interface |
Physical Characteristics
Dimensions | TDP1000, TDP0500 | P6251, P6250 | ||
|---|---|---|---|---|
lb./in. | kg/cm | lb./in. | kg/cm | |
Weight | 0.320 lb. | 0.146 kg | 0.360 lb. | 0.163 kg |
Compensation Box Dimensions | ||||
Height | 1.6 inches | 4.1 cm | 1.0 inches | 2.6 cm |
Width | 1.2 inches | 3.05 cm | 1.6 inches | 4.1 cm |
Length | 4.2 inches | 10.7 cm | 3.2 inches | 8.13 cm |
Cable Length | 47.2 inches, 1.2 meters | |||
Power Requirements
Device | Description |
|---|---|
TDP1000, TDP0500 | Are powered directly by the DPO7000, DPO4000, and MSO4000 Series oscilloscopes using the TekVPI interface. |
P6251, P6250 | Are powered directly by the TekProbe-BNC interface, eliminating the need for additional power supplies and cables when used with TekProbe-BNC oscilloscopes. May also be powered through the 1103 TEKPROBE Power Supply for use with non-TekProbe interface instrumentation. |
Standard Warranty - 1-year parts and labor.
Recommended Oscilloscopes
Probes | Oscilloscopes | Interface | Adapter Required |
|---|---|---|---|
TDP1000, TDP0500 | DPO7000, DPO4000, and MSO4000 Series | TekVPI probe | — |
P6251, P6250 | TDS5000 Series, TDS500, TDS600, and TDS700 Series, and other Tektronix oscilloscopes with TekProbe BNC-Level2 interface | TekProbe BNC-Level2 | — |
DPO70000, DSA70000, TDS6000, and TDS7000 oscilloscopes | TekConnect® | TCA-BNC |
Required Oscilloscope Firmware
Probe | Oscilloscopes | Firmware |
|---|---|---|
TDP1000, TDP0500 | DPO7000 Series | Version 3.0.2 or later |
DPO/MSO4000 Series | Version 2.06 or later | |
P6251, P6250 | TekProbe-BNC Level II Oscilloscopes and adapter (TCA-BNC) | TekProbe-BNC interface is firmware-independent |
- 深圳市美孚科技有限公司
- 联系人秦洪立(先生)
- 会员[加为商友] [发送信件]
- 电话
- 手机
- 地区全国
- 地址中国 广东 深圳市福田区 深圳市福田区华强北路现代之窗B座29D
