供应泰克TDP1000高压差分探头

产品品牌：泰克Thoo

产品型号：TDP1000

本公司供应泰克TDP1000高压差分探头质量保证，欢迎咨询洽谈。

• Overview
• Specifications
• Ordering Information

  Features & BenefitsOutstanding Electrical Performance1 GHz and 500 MHz Probe Bandwidth<1 pF Differential Input CaPACitance1 MΩ Differential Input Resistance±42 V (DC + pk AC) Differential Input Voltage>18 dB CMRR (at 250 MHz 50x attenuation)Selectable Bandwidth-limiting FiltersDC RejectVersatile DUT ConnectivitySmall Compact Probe Head for Probing Small Geometry Circuit ElementsStraight Pin, Square Pin, Solder Down, Variable Pitch Standard AccessoriesRobust Design for ReliabilityEasy to UseProvides Automatic Units Scaling and Readout on the Oscilloscope DisplayTDP1000, TDP0500 Connect Directly to the DPO7000, DPO4000, and MSO4000 Series Oscilloscopes Using TekVPI™ Probe Interface (No additional power adapters required)Easy Access to Scope-displayed Probe Menu for Probe Setup Control and Operating Status InformationAutoZero – Zeros Out Output OffsetP6251, P6250 Connect Directly to TDS5000 and other TekProbe™ Interface Oscilloscopes, or to TekConnect® Oscilloscopes Using TCA-BNC Adapter

  ApplicationsHigh-speed Switch Mode Power Supply DesignCAN/LIN Bus DesignHigh-speed Digital DesignDigital Design and CharacterizationManufacturing Engineering TestResearch and Development

  The TDP1000, TDP0500, P6251, and P6250 High-voltage Differential Probes provide excellent high-speed electrical and mechanical performance required for today’s Switch Mode Power Supply (SMPS), CAN/LIN Bus, and high-speed digital system designs.

  Specifically designed for use with and direct connection to Tektronix oscilloscopes with either the TekVPI™ probe interface, or TekProbe BNC Interface. The TDP1000, TDP0500, P6251, and P6250 High-voltage Differential Probes achieve high-speed signal acquisition and measurement fidelity by solving three traditional measurement challenges:

  Outstanding Electrical PerformanceVersatile Device-Under-Test ConnectivityEase of Use

  Characteristics

  Characteristic	Description
  Bandwidth (Probe only)	1 GHz (TDP1000, P6251) 500 MHz (TDP0500, P6250)
  Attenuation	5x, 50x
  Rise Time (Probe only)	≤350 ps (TDP1000, P6251) <700 ps (TDP0500, P6250)
  Differential Input Capacitance	<1 pF
  Differential Input Resistance	1 MΩ
  CMRR	>55 dB at 30 kHz >50 dB at 1 MHz >18 dB at 250 MHz (warranted at 50x attenuation)
  Sensitivity/Noise Level	2 mVRMS (5x attenuation) 1 mVRMS (50x attenuation) referred to the probe output 10 mVRMS (5x attenuation) 50 mVRMS (50x attenuation) referred to the probe input
  Differential Mode Input Voltage	±42 V (DC + pk AC); 30 VRMS
  Common Mode Input Voltage	±35 V (DC + pk AC); 25 VRMS
  Input Offset Range
  TDP1000, TDP0500	±42 V (5x or 50x attenuation)
  P6251, P6250	±4.25 V (5x attenuation) ±42 V (50x attenuation)
  Max Input Voltage (Nondestruct)	±100 V (DC + pk AC)
  Selectable Bandwidth Filter Limits
  TDP1000, TDP0500	100 Hz, 10 kHz, 1 MHz, Full
  P6251, P6250	5 MHz, Full
  DC Reject	0.4 Hz (5x) 4 Hz (50x)
  Gain Accuracy at DC	±2%
  Propagation Delay	6.5 ns
  Scope Interface
  TDP1000, TDP0500	TekVPI™ Probe Interface
  P6251, P6250	TekProbe BNC Level II Interface

  Physical Characteristics

  Dimensions	TDP1000, TDP0500		P6251, P6250
  	lb./in.	kg/cm	lb./in.	kg/cm
  Weight	0.320 lb.	0.146 kg	0.360 lb.	0.163 kg
  Compensation Box Dimensions
  Height	1.6 inches	4.1 cm	1.0 inches	2.6 cm
  Width	1.2 inches	3.05 cm	1.6 inches	4.1 cm
  Length	4.2 inches	10.7 cm	3.2 inches	8.13 cm
  Cable Length	47.2 inches, 1.2 meters

  Power Requirements

  Device	Description
  TDP1000, TDP0500	Are powered directly by the DPO7000, DPO4000, and MSO4000 Series oscilloscopes using the TekVPI interface.
  P6251, P6250	Are powered directly by the TekProbe-BNC interface, eliminating the need for additional power supplies and cables when used with TekProbe-BNC oscilloscopes. May also be powered through the 1103 TEKPROBE Power Supply for use with non-TekProbe interface instrumentation.

  Standard Warranty - 1-year parts and labor.

  Recommended Oscilloscopes

  Probes	Oscilloscopes	Interface	Adapter Required
  TDP1000, TDP0500	DPO7000, DPO4000, and MSO4000 Series	TekVPI probe	—
  P6251, P6250	TDS5000 Series, TDS500, TDS600, and TDS700 Series, and other Tektronix oscilloscopes with TekProbe BNC-Level2 interface	TekProbe BNC-Level2	—
  	DPO70000, DSA70000, TDS6000, and TDS7000 oscilloscopes	TekConnect®	TCA-BNC

  Required Oscilloscope Firmware

  Probe	Oscilloscopes	Firmware
  TDP1000, TDP0500	DPO7000 Series	Version 3.0.2 or later
  	DPO/MSO4000 Series	Version 2.06 or later
  P6251, P6250	TekProbe-BNC Level II Oscilloscopes and adapter (TCA-BNC)	TekProbe-BNC interface is firmware-independent

  
  

  公司联系方式

  • 深圳市美孚科技有限公司 [加为商友]
    
  • 联系人秦洪立(先生)  
  • 地区广东-深圳市
  • 地址中国 广东 深圳市福田区 深圳市福田区华强北路现代之窗B座29D
  •