供应安捷伦Agilent54622D安捷伦54622D混合示波器

产品品牌：安捷伦Agilent

产品型号：54622D

详细介绍

Agilent54622D混合示波器特点：
专利高清晰显示与2MB MegaZoom深存储器相结合，能发现有关信号的大量信息
独特的2+16混合配置可同时进行示波器和逻辑测量。
强大的触发能力，可选择边沿，模式，脉冲，序列，持续时间和I2C触发

Agilent 54620系列示波器的水平分辨率几乎比市场上任何其它数字式示波器高一倍，其专利的新显示技术为观察电路行为开启了一扇新的观察窗。您能深入观察过去难以看到的信号细节，从窄跳变，失真的边沿到间歇性事件，从而忠实复现信号的真情实景。

选择最好的配置

54620系列能提供60MHz和100MHz的多种通道配置，以符合您的专门要求。您可选择2个或4个通道，或具有2个示波器通道及16个定时通道的混合信号示波器，这是查找混合模拟和数字电路故障的理想设备。

独特的显示，独特的视角

通过高分辨率显示、2MB MegaZoom深存储器及信号处理系统的结合，54620系列示波器比常规数字示波器要快25倍，还为您的测量增加了专门的统计功能。示踪上的每一点均以32级亮度显示，越亮的点代表越多的采样。并能用平移和缩放功能容易地找到关注区域内的细节。所有这些信息均可在全速下，以高速5ns的分辨率在一次测量中获得。

带Mega Zoom的Agilent 54620系列示波器

Agilent MegaZoom提供了实现深存储器的独特方法。可在每个通道上捕获多达2M的信号采样，并具有较高的持续采样率和响应迅速的显示。您可找到隐匿于复杂信号中的细节，揭示导致触发事件的异常现象，同时观察高速和低速的信号。

与传统深存储示波器不同，MegaZoom并非一种特殊的复杂工作模式，它不会减慢示波器的运行。MegaZoom与高清晰显示一起工作，它总处在自动运行中：您可得到深存储顺的能力，而没有任何损失。

Equipment ProfileSpecifications:

Brand	Agilent / HP
Model	54622D
Description	100MHz 2+16CH 200MSa/s Oscilloscope Mixed Signal
Category	Oscilloscopes
#Acquisition(Analog Channels)
Max Sample Rate	200 MSa/s
Max Memory Depth	4 MB interleaved, 2 MB each channel
Vertical Resolution	8 bits
Peak Detection	5 ns
#Acquisition	Digital Channels:
Max Sample Rate	400 MSa/s interleaved, 200 MSa/s each channel
Max Memory Depth	8 MB interleaved, 4 MB ea. channel
Vertical Resolution	1 bit
Glitch Detection	5 ns
#Vertical System(Analog Channels)
Analog Channels	Ch 1 and 2 simultaneous acquisition
Bandwidth (-3dB)	dc to 100 MHz
ac Coupled	3.5 Hz to 100 MHz
Calculated Risetime	~3.5 ns
Single Shot Bandwidth	50 MHz
Range	1 mV/div to 5 V/div
Maximum Input	CAT I 300 Vrms, 400 Vpk, CAT II 100 Vrms, 400 Vpk With 10073C/10074C 10:1 probe: CAT I 500 Vpk, CAT II 400 Vpk 5 Vrms with 50 ohm input
Offset Range	±5 V on ranges <10 mV/div; ±25 V on ranges 10 mV/div to 199 mV/div; ±100 V on ranges >=200 mV/div
Dynamic Range	Lesser of ±8 div or ±32 V from center screen
Input Resistance	1 Mohm ±1%
Input CaPACitance	~ 14 pF
Coupling	ac, dc, ground
BW Limit	~ 20 MHz selectable
Channel-to-Channel Isolation	dc to 20 MHz > 40 dB; 20 MHz to max bandwidth > 30 dB
DC Vertical Gain Accuracy	±2.0% full scale
#Vertical System(Digital Channels)
Number of Channels	16 Digital – labeled D15 - D0
User-Defined Threshold Range	±8.0 V in 10 mV increments
Maximum Input Voltage	±40 V peak CAT I
Threshold Accuracy	±(100 mV + 3% of threshold setting)
Input Dynamic Range	±10 V about threshold
Minimum Input Voltage Swing	500 mV peak-to-peak
Input Capacitance	~ 8 pF
Input Resistance	100 kohm ±2% at probe tip
Channel-to-Channel Skew	2 ns typical, 3 ns maximum
#Horizontal
Range	5 ns/div to 50 s/div
Resolution	25 ps
Delay Jitter	<1 ppm
Modes	Main, Delayed, Roll, XY
#Trigger System
Sources	Ch 1, 2, line, ext, D15 - D0
Holdoff Time	~60 ns to 10 seconds
Modes	Auto, Triggered (normal), SingleAuto level (54621A/D, 54622A/D, 54624A only)
#Analog Channel Triggering
Range (internal)	±6 div from center screen
Sensitivity	Greater of 0.35 div or 2.5 mV
Coupling	AC (~3.5 Hz on 54621A/D, 54622A/D, 54624A. ~10 Hz on 54641A/D, 54642A/D), DC, noise reject, HF reject and LF reject (~ 50 kHz)
#Display System
Display	7-inch raster monochrome CRT
Throughput of Analog Channels	25 million vectors/sec per channel with 32 levels of intensity
Resolution	255 vertical by 1000 horizontal points (waveform area) 32 levels of gray scale
Controls	Waveform intensity on front panel. Vectors on/off; infinite persistence on/off 8 x 10 grid with continuous intensity control
Built-in Help System	Key-specific help in 11 languages displayed by pressing and holding key or softkey of interest
Real Time Clock	Time and date (user setable)
#General Characteristics
Probe Comp Output	Frequency ~2 kHz; Amplitude ~5 V
Trigger Out	0 to 5 V with 50 ohm source impedance; delay ~ 22 ns
Printer Power	7.2 to 9.2 V, 1 A
##Physical
Size	32.26 cm wide x 17.27 cm high x 31.75 cm deep (without handle)
Weight	6.35 kgs (14 lbs) on 54621A/D, 54622A/D, 54624A; 6.82 kgs (15 lbs) on 54641A/D, 54642A/D