模拟存储示波器 Tek 466

厂商:美国泰克

100MHz带宽，双踪，衰减 5mV/div, 扫速 5-ns/div

The 466 Dual Trace Storage Oscilloscope is designed to display non-repetitive or slow moving signals. A portable unit with DC to 100MHz response. Features two modes of storage: Variable Persistence and Fast Transfer. Stored writing speed of 110 div/μsec. Deflection factor from 5 mV /div to 5 V/div in a 1-2-5 sequence. Sweep rate of 5 nsec/div with X10 magnifier. Weighs 26 lbs. CRT mesh filter installed to minimize CRT faceplate radiation. Four signal-output BNC connectors on the rear chamber changes to a type that improves shielding of the connected signal leads. The unit offers reduced scan mode in which the stored writing speed is 3000 div/μs.

技术指标

Form Factor: Benchtop Bandwidth: 100 MHz Rise time: 3.5 ns Number of Channels: 2 ch Min. Vertical Sensitivity: 5 mV/div Maximum Vertical Sensitivity: 5 V/div Vertical(or Deflection Factor) Accuracy: 3 % Input Coupling: AC,DC,GND Input Impedance: 1 MOhm Maximum Input Voltage: 250 V(dc+p Main time base - lowest: 50 ns/div Main time base - highest: .5 s/div B Sweep Time Base (low): 50 ns/div B Sweep Time Base (high): 50 ms/div Time base Magnification factor (X?): x10 Timebase accuracy: 2 % Trigger Source: External,Internal Trigger Sensitivity: 0.3 mV Display Type Color: CRT Display Size: 13 cm Trace writing speed (Analog Oscilloscope): 3 div/s

测量特性

X/Y Mode Comm Mode Rejection Add Mode Inverted Trace Shift Chopped Mode Cascaded Trigger Jitter Level Control Trigger View Trace Separation Trigger Hold Off Differential Time Z Axis Channel 1 Output

选件

Option 01 = Delete DM44 Temperature Probe Option 04 = Emc Modification Option 05 = TV Sync Separator (Provides triggering on TV field) Option 07 = Ext Dc Operation (not available with DM44) Option 10 = Third Channel Trigger View (Cannot be ordered with Option 05) Option DM44 = Built-in DMM

公司联系方式

• 北京市北方思源电子技术中心 [加为商友]
  
• 联系人刘(女士)  
• 地区北京
• 地址海淀区大柳树路富海中心
•