点击图片查看原图
The LeCroy 9314AM oscilloscope is a graph-displaying device – it draws a graph of an electrical signal. In most applications, the graph shows how signals change over time: the vertical (Y) axis represents voltage and the horizontal (X) axis represents time. The intensity or brightness of the display is sometimes called the Z axis.
The LeCroy 9314AM oscilloscope's simple graph can tell you many things about a signal, such as: the time and voltage values of a signal, the frequency of an oscillating signal, the “moving parts” of a circuit represented by the signal, the frequency with which a particular portion of the signal is occurring relative to, other portions, whether or not a malfunctioning component is distorting the signal, how much of a signal is direct current (DC) or alternating current (AC) and how much of the signal is noise and whether the noise is changing with time.
Performance Characteristics of the 9314AM| Form Factor | Benchtop |
| Bandwidth | 400 MHz |
| Number of Channels | 2 ch |
| Simultaneous Channels | 2 ch |
| Simultaneous Maximum Sampling Rate/ch | 100 MSa/s |
| One ch. only max. sampling rate | 100 MSa/s |
| Max. Record Length | 200000 pt/sec |
| Min. Vertical Sensitivity | 2 mV/div |
| Maximum Vertical Sensitivity | 5 V/div |
| Number of Bits | 8 bits |
| Input Impedance | 1 MOhm |
| Input Impedance (alternate) | 50 Ohm |
| Input Coupling | AC,DC,GND |
| Maximum Input Voltage | 250 Vrms |
| Maximum Input#2 (for Impedance #2) | 5 Vrms |
| Main time base - lowest | 1 ns/div |
| Main time base - highest | 1000 s/div |
| Timebase accuracy | 0.002 % |
| Trigger Source | External,Internal |
| Trigger Modes | Auto,Edge,Normal,Single,State,Stop,Width |
| Minimum Trigger Holdoff | 10 ns |
| Trigger Sensitivity | 0.5 mV |
| Minimum Glitch Trigger | 2.5 ns |
| Display Type | CRT Monochrome |
| Display Size | 22.86 cm |
| Display modes | Infinite,Normal,Varable,X/Y |
- 深圳市东仪通电子仪器有限公司 [加为商友]
- 联系人李远东(先生) 经理
- 地区广东-深圳市
- 地址深圳市沙井镇新玉路大宏科技园10楼
