供应力科ZS1000,ZS1500有源单端探头最新价格

产品品牌：力科

产品型号：ZS1000,ZS1500

ZS Series ProbesThe ZS Series probes provide high impedance and an extensive set of probe tips and ground accessories to handle a wide range of probing scenarios. The high 1 MΩ input resistance and low 0.9 pF input caPACitance means this probe is ideal for all frequencies. The ZS Series probes provide full system bandwidth with all LeCroy oscilloscopes with bandwidths of 1 GHz and lower.

 

High Impedance Reduces Circuit Loading Across Full Oscilloscope BandwidthEngineers must commonly probe high-frequency signals with high signal fidelity. Typical passive probes with high input R and C provide good response at lower frequencies, but inappropriately load the circuit, and distort signals, at higher frequencies. The ZS Series features both high input R (1 MΩ) and low input C (< 0.9 pF) to reduce circuit loading across the entire probe/oscilloscope bandwidth. With low circuit loading, and a form factor that allows probing in confined areas, the ZS Series becomes the everyday probe for all different types of signals and connection points. The ZS1000 is ideal for 200–600 MHz oscilloscopes. The ZS1500 is ideal for 1 GHz oscilloscopes.

 

 

A Variety of Probe Tips for Varied TasksEngineers often need to probe a variety of different test points in confined spaces. The extensive range of standard and available tip accessories for the ZS Series of probes ensures that this probe can meet any difficult probing challenge. Various flexible leads and clips, such as right-angle leads, Y-adapters, and pico hooks, are also available for probing test points that are spaced farther apart.

 

 

Innovative Grounding Solutions Provide the Highest Signal Fidelity and Easiest ConnectionsMaking a good ground connection is just as important as accessing the right test point. Keeping the ground loop short is critical to eliminating the effect of high inductance on the signal. The ZS Series of probes provides several grounding capabilities to offer the highest signal fidelity by shortening the ground loop and eliminating the effect of that loop on the signal. The standard Offset ground lead is a “twisted-Z” shape for probing signal and ground points that are extremely close together. The standard ground blade and copper pad provides the shortest ground loop possible, and provides a pulse response that cannot be achieved with long ground leads. A variety of other ground connections are available for nearly any type of probing requirement.

 

华普通用提供力科ZS1000,ZS1500有源单端探头,要购买力科ZS1000,ZS1500有源单端探头的客户就选择华普通用.

热线电话： 400-180-5117    0755-8324-8861

企业QQ：（634155098）

华普通用提供力科ZS1000,ZS1500有源单端探头,要购买力科ZS1000,ZS1500有源单端探头的客户就选择华普通用.
产品来源网址：http://www.hpge.com.cn/products_view-717.html