FlexiForce Sensor 压力传感器 弯曲压力传感器 机器人配件

FlexiForce Sensor 压力传感器Flexiforce为目前常用的可挠曲压力传感器，本身压力值有三种区块1lb、25lb、100lb可针对你的需求作搭配。输出信号为类比信号，可透过BASIC Stamp的RCtime指令直接做读取，不需外接ADC0831。此套件包含有所需搭配的220 欧电组，0.1 uF and 0.01 uF电容。Tekscan’s FlexiForce? sensor measures force between two surfaces. The sensor output exhibits a high degree of linearity, low hysteresis and minimal drift compared to other thin-film force sensors. The Flexiforce single element sensor acts as a resistor in an electrical circuit. When the sensor is unloaded, its resistance is very high. Resistance decreases when force is applied to the sensor. The resistance can be read by connecting an ohmmeter to the outer two pins of the sensor and applying a force to the round tab sensing area at the end of the film.
The resistance of the Flexiforce sensor is proportional to weight. The sensor included in your kit is rated at 1.6
lbs.1 The purpose of the Parallax example circuit is only to demonstrate the resistive nature of the sensor with
a resistor/caPACitor discharge time measurement circuit; no correlations to weight are made in these examples.Packing List
Verify that your Flexiforce Demo Kit has the following components:
? (1) Flexiforce thin-film sensor
? (1) 220 ohm resistor
? (1) 0.1 uF capacitor
? (1) 0.01 uF capacitor工业应用：Nip Roller (Paper，Fabric，Fax，Coin Machine)Compression MoldingsPackaging SealsRobotic Grip Forces

医疗应用：

Insulin PumpSurgical InstrumentsBandage/Cast PressureNeck/Back/Knee-Brace FitProbing Devices/li>Prosthetic Limb ForcesForceps Closure