Dynisco熔体压力传感器PT460E

品牌：	dynisco	型号：	PT460E	种类：	压力
制作工艺：	集成	输出信号：	模拟型

PT460E SeriesFeatures• Accuracy better than +/- 0.5%• Dymax coated stainless steel wetted parts• Proven sensor design• 0 - 500 to 0 -30,000 psi• Internal 80% shunt calibration特性精度优于+/- 0.5%Dymax 涂有不锈钢的密封部件传感器设计认证0 - 500到0 -30,000 psi内部自校准80%Benefits• Reliable, repeatable pressure measurements• Superior abrasion resistance• Good stability and repeatability• Wide variety pressure ranges• Easy to calibrate with local indicator优点可靠性，重复性的压力测量较好的抗磨损性优良的稳定性和可重复性广泛的压力范围带有本地显示便于校准DescriptionThe PT460E Series transducer is a +/- 0.5% sensor ideal for melt pressure applications requiring simple installation, repeatability and reliability. The PT460E transducers provide the industry standard 3.33 mV/V signal designed to work with most pressure indicators. The PT460E comes equipped with a six pin bendix connector. Optional therm℃ouple or RTD configurations are available to provide melt temperature. The PT460E features a 1/2-20 UNF thread for installation in standard transducer mounting holes and can be supplied with a variety ℉ other electrical connections if desired.产品描述PT460E系列传感器精度为+/- 0.5%，是应用在安装简单，重复性和可靠性熔体压力测量的理想传感器。PT460E传感器提供工业标准的3.33 mV/V信号，能和大多数压力仪器配套使用。PT460E装备成6芯bendix连接器。可选择热电偶和RTD配置来提供熔体温度。螺纹为1/2-20 UNF的 PT460E安装在标准的传感器安装孔，根据需要还可以提供其他的多种电气连接。SpecificationsPERFORMANCE CHARACTERISTICSOutput:3.33 mV/V +/- 2.0%Input Voltage:10 Vdc recommended, 12 Vdc maximumCombined Error:+/- 0.5% FSO, (Including Linearity, Repeatability & Hysteresis)Repeatability:+/- 0.2%FSOConfiguration:Four-arm bonded foil Wheatstone bridge strain gageBridge Resistance:Input: 345 Ohms minimumOutput: 350 Ohms +/- 10%Over Pressure:2 X FSO or 35,000 psi whichever is lessZero Balance:+/- 10% FSOInternal Shunt Calibration (R-Cal):80% FSO +/- 1%Insulation Resistance:1000 megohms @ 50 VdcTEMPERATURE & MECHANICAL CHARACTERISTICSMax Diaphragm Temperature:750℉ (400℃)Zero Shift (due to temperature change):25 psi/100℉ Typical (45 psi/100℃)Electronics Operating Temperature:250℉ (121℃)Zero Shift Due to Temperature Change:+/- 0.05% FS/℉ max (+/- 0.10% FS/℃ max)Sensitivity Shift Due to Temperature Change:+/- 0.02% FS/℉ max (+/- 0.04% FS/℃ max)Mounting Torque:500 inch/lbs. maximumStandard Wetted Parts:Dymax coated 15-5 PH SST技术参数工作特性输出：3.33 mV/V +/- 2.0%输入电压：建议10 Vdc，最大12 Vdc综合精度：+/- 0.5% FSO,（包括线性，重复性和滞后性）重复性：+/- 0.2%FSO结构：慧斯通电桥桥路阻抗：最小输入345 Ohms输出：350 Ohms +/- 10%过载电压：2 X FSO或 35,000 psi，或者比之小零点平衡：+/- 10% FSO内部自校准：80% FSO +/- 1%绝缘阻抗：1000 megohms @ 50 Vdc温度和机械特性最大膜片温度：750℉ (400℃)由温度变化引起的零位偏移：25 psi/100℉典型的(45 psi/100℃)电气操作温度：250℉ (121℃)由温度变化引起的零位偏移：+/- 0.05% FS/℉ 最大 (+/- 0.10% FS/℃最大)由温度变化引起的灵敏度变化：+/- 0.02% FS/℉ 最大 (+/- 0.04% FS/℃ 最大)安装扭矩：最大500 inch/lbs. maximum标准密封部件：Dymax 涂有15-5 PH 不锈钢