美国kulite飞机压力传感器

• FAA Manufacturer’s Maintenance Facility
KULITE SEMICONDUCTOR PRODUCTS, INC. • One Willow Tree Road • Leonia, New Jersey 07605 • Tel: 201 461-0900 • Fax: 201 461-0990 •http://www.kulite.com
Note: Custom pressure ranges, accuracies and mechanical configurations available.
Continuous development and refinement of our products may result in specification changes without notice - all dimensions nominal. (E)
SPECIFICATIONS
UNAMPLIFIED APT-SERIES
AMPLIFIED APTE SERIES
Excitation
10VDC Regulated
28VDC ± 4V
Output
100mV (Typ.)
5VDC Diff. or Single Ended
Power Consumption
100mW (Typ.)
280mW (Typ.)
Input Impedance
1000 Ohms (Min.)
N/A
Output Impedance
2000 Ohms (Max.)
100 Ohms (Max.)
Operating Temperature Range
-65°F to +300°F (-55°C to +150°C)
-65°F to +250°F (-55°C to +120°C)
Weight
Gage and Absoloute Versions
Differential Version
0.3 Lb. (Max.)
0.45 Lb. (Max.)
0.37 Lb. (Max.)
0.6 Lb. (Max.)
Case Outline
Gage and Absoloute Versions
Differential Version
Case Length May Vary With Range, Measuring Mode, Pressure Port and Connector
Construction Materials
316 SS And 17-4 PH SS
Pressure Range
To Specification 0-15 PSI to 0-5000 PSI (0-1.0 BAR to 0-350 BAR) (Typ.)
Proof Pressure
2 Times Rated Pressure Range
Burst Pressure
3 Times Rated Pressure Range Up to 10,000 PSI
Insulation Resistance
100 Megohms Min. @ 50VDC
Mounting Torque
75 Inch-Pounds (Max.)
Total Error Band
Includes Linearity, Hysteresis, Repeatability, Mounting Error and Vibration Effects, Thermal Errors Within The Compensated Temperature Range, As Well As Normalization Errors of Zero and Full Scale. (See Fig I and II For Typical Cases)
Resolution
Infinitesimal
MTBF
At Least 30,000 Hours
Fluid Temperature
-65°F to +300°F (-55°C to +150°C)
Altitude-Operating
Up To 51,000 Feet
Media Compatability
JP-4 and JP-5 Grade Aviation Turbine Fuel Per MIL-T-5624, Hydraulic Fluid Per MIL-H-5606, MIL-H-83282, Engine and
Transmission Lubrication Oil Per MIL-L-7808 and MIL-L-23699 and Aviation Gasoline Per MIL-G-5572 All Grades
Humidity
100% Relative Humidity
Acceleration
Operational After Being Subjected to “G” Levels of 12 “G”s Per MIL-STD-810C, Method 513.2 Procedure 1
Linear Vibration
20g Peak, Sine 10 to 2000 Hz
Mechanical Shock
50g half Sine Wave 11 msec. Duration
Electromagnetic Interference
APTE SERIES: Meets RTCA DO-160 Sections 18, 19 and 21 All Cat. A, Section 20 Cat. U. (With Shielded Cable)
Electrical Spike Protection
APTE SERIES: Unit Satisfies Power Input and Voltage Spike Conducted DO-160 Sections 16 and 17.
Power Input Test 16 Voltage Spike Conducted Test 17
2.27
0(