UV-Probe Integrator Multi (ComPort)
+ up to 4 UV-sensors
+ up to 4 different UV-bands
+ UV intensity mW/cm2
+ UV peak intensity mW/cm2
+ UV dose mJ/cm2
+ USB ComPort (Option)
+ graphic chart on computer (Option)
The UV-Probe Integrator Multi is a self-contained, high quality UV measuring instrument. It is designed to
measure and display UV intensity in mW/cm2. An additional function is the scan of the peak value of UVintensity
in mW/cm2 and to measure the UV dose in mJ/cm2 within a pre-set period of 30/60 seconds.
It is able to automatically detect up to four different UV-sensors in up to four different UV-bands (UV-A,
UV-B, UV-C, UV-Diazo or full UV)
Extra sensors (up to three) should be ordered right with the initial purchase in order to calibrate sensors to
the base unit. Due to its UV sensor(s) and the integrated microprocessor the UV-Probe Integrator Multi
can measure and display the peak UV-energy of up to four different UV bands (mW/cm2).
Additionally, this UV-Probe Integrator Multi is calculating the UV-dosage (mJ/cm2) of the UV energy
supplied during the time of exposure of one measuring cycle. The UV-dosage is calculated as the total
Integral of UV-dosage over the UV spectral band of the respective sensor connected.
The removable, probe-type sensors are connected to the base unit by a cable of approx. 1 meter (40”)
length. In the function “Direct” the actual UV-intensity in mW/cm2 supplied to the sensor is measured. The
function “Scan” will start a 30 second measuring cycle of both, UV-intensity and UV-dose. After
completion of the measuring cycle the measuring results can be scrolled through on the built in 2 x 16
digit LCD display.
A special AUTO-OFF feature that turns off the unit automatically after one minute serves as energy
saving and extension of the battery service life.
Optionally, this microprocessor integrator is available with an USB ComPort and an evaluation software
for downloading the data to a computer to show, edit and store a history of the measuring results of the
entire measuring cycle as graphic and numeric charts (mW/cm2) and (mJ/cm2)
The UV-Probe Integrator Multi (ComPort) is available in five different measuring ranges: 订货编号：
SZ1033-1-1 Item 33.1.1 UV-Probe Integrator Multi, Type 1 UV-V (Diazo) 350 – 460 nm
SZ1033-1-2 Item 33.1.2 UV-Probe Integrator Multi, Type 2 UV-A 315 – 400 nm
SZ1033-1-3 Item 33.1.3 UV-Probe Integrator Multi, Type 3 UV 230 – 410 nm (STD)
SZ1033-1-4 Item 33.1.4 UV-Probe Integrator Multi, Type 4 UV-B 280 – 315 nm
SZ1033-1-5 Item 33.1.5 UV-Probe Integrator Multi, Type 5 UV-C 230 – 280 nm
Extra sensors are avaliable as follows:
SZ1033-2-1 Item 33.2.1 Sensor Type 1 UV-V (Diazo) 350 – 460 nm
SZ1033-2-2 Item 33.2.2 Sensor Type 2 UV-A 315 – 400 nm
SZ1033-2-3 Item 33.2.3 Sensor Type 3 UV 230 – 410 nm
SZ1033-2-4 Item 33.2.4 Sensor Type 4 UV-B 280 – 315 nm
SZ1033-2-5 Item 33.2.5 Sensor Type 5 UV-C 230 – 280 nm
UV-ComPort Probe Integrator Multi
SZ1033-4-1 Item 33.4.1 UV-ComPort Probe Integrator Multi, Type 1 UV-V (Diazo) 350 – 460 nm
SZ1033-4-2 Item 33.4.2 UV-ComPort Probe Integrator Multi, Type 2 UV-A 315 – 400 nm
SZ1033-4-3 Item 33.4.3 UV-ComPort Probe Integrator Multi, Type 3 UV 250 – 410 nm
SZ1033-4-4 Item 33.4.4 UV-ComPort Probe Integrator Multi, Type 4 UV-B 280 – 315 nm
SZ1033-4-5 Item 33.4.5 UV-ComPort Probe Integrator Multi, Type 5 UV-C 230 – 280 nm UV-Probe Integrator Multi (ComPort)
Technical Data:
Spectral ranges: UV 230 – 410 nm (Standard) or other
Max. Power Input 0 to 5,000 mW/cm2
Display: LCD, 2x16 digits
Display range: 0 to 60,000 mJ/cm2
Measuring range: 0 to 2,000 mW/cm2
Sampling rate: 0.005 sec (200/sec)
Recording cycle: 30 sec.
Power source: 2 x long life 3.6 V Lithium Battery
Power consumption: 20 μA
Battery service life: 2,000 hrs
Dimensions: 5.5” (120 mm) x 3” (75 mm) x 0.4”(10 mm)
Weight: approx. 6 ounce (150 g)
Dimensions of probe: Ø 1.5” (40 mm) x 0.4” (10 mm)
Length of probe cable: approx. 40” ( 1 meter )
Operating temperature: 32 to 113° F / 0 to 45° C
Base Accuracy: ± 5 %
While measuring, the sensor of the UV-Probe Integrator Multi can withstand max. 230° F / 110°
Centigrade for up to 10 seconds. The temperature of the housing should not exceed 113° F / 45°
Centigrade.
Because of uneven radiation distribution of the UV light source and different type of construction of the
measuring devices by different manufacturers, different readings may appear under the same
measurement conditions.
Calibration:
In order to keep its full function and precision it is recommended to have re-calibration done once per
year. Re-calibration will also be necessary after change of battery. PTB traceable calibration with
certificate
Warranty: 2 years from the date of purchase |
点击图片查看原图
