低频电磁辐射选频分析仪
仪器介绍
PMM's new E-H fields analyzer model
EHP200 has been designed for accurate,
stand-alone and PC-based measurements
of both electric (0,02 to 1000 V/m)
and magnetic (6 mA/m to 300 A/m)
fields, in the 9 kHz - 30 MHz frequency
range.
The robust housing sized only 96 x 96 x
115 mm holds both field sensors and
electronic measuring circuitry.
Separate 3 axis and total values (peak
and average) are measured with exceptional
flatness and linearity of ±0,3 dB.
Results are expressed in V/m, A/m, μT,
mW/cm2, W/m2.
The EHP200 features built-in spectrum
analysis with maximum IF resolution of
1 kHz for detailed measurements of E
and H field intensity vs. frequency with
dynamic range of 80 dB.
Power supply by internal rechargeable
Li-Ion battery of up to 8 hours of continuous
operation, or from external 10 ÷
15 VDC source. AC adapter provided.
The EHP200 is controlled by the PMM’s
PC program, and measurements are sent
in real time through the optical fiber
link. An auxiliary input allows for measuring
the frequency spectrum of external
signals from any other RF device.
Thanks to its very small size and optical
fiber link, the EHP200 does not influence
the electromagnetic fields to measure,
thus ensuring more accurate and sensitive
measurements.
The EHP200 is particularly suitable for
nearby measurements of LW-AM-SW
transmitters, metal detectors, and any
other measurements of RF signal in the
9 kHz - 30 MHz range, with great advantages
wherever the conventional antennas
are inadequate due to their physical
dimensions and cable influence
仪器介绍
PMM's new E-H fields analyzer model
EHP200 has been designed for accurate,
stand-alone and PC-based measurements
of both electric (0,02 to 1000 V/m)
and magnetic (6 mA/m to 300 A/m)
fields, in the 9 kHz - 30 MHz frequency
range.
The robust housing sized only 96 x 96 x
115 mm holds both field sensors and
electronic measuring circuitry.
Separate 3 axis and total values (peak
and average) are measured with exceptional
flatness and linearity of ±0,3 dB.
Results are expressed in V/m, A/m, μT,
mW/cm2, W/m2.
The EHP200 features built-in spectrum
analysis with maximum IF resolution of
1 kHz for detailed measurements of E
and H field intensity vs. frequency with
dynamic range of 80 dB.
Power supply by internal rechargeable
Li-Ion battery of up to 8 hours of continuous
operation, or from external 10 ÷
15 VDC source. AC adapter provided.
The EHP200 is controlled by the PMM’s
PC program, and measurements are sent
in real time through the optical fiber
link. An auxiliary input allows for measuring
the frequency spectrum of external
signals from any other RF device.
Thanks to its very small size and optical
fiber link, the EHP200 does not influence
the electromagnetic fields to measure,
thus ensuring more accurate and sensitive
measurements.
The EHP200 is particularly suitable for
nearby measurements of LW-AM-SW
transmitters, metal detectors, and any
other measurements of RF signal in the
9 kHz - 30 MHz range, with great advantages
wherever the conventional antennas
are inadequate due to their physical
dimensions and cable influence
公司联系方式
- 北京森馥科技有限公司 [加为商友]
- 联系人徐剑坤(先生) 市场销售
- 地区北京
- 地址北京市朝阳区北苑路傲城融富中心A804室