供应德国OPTOSOL太阳能仪器EMISSIOMETER

The thermal emittance of opaque samples is complementary to their infrared reflectance. Our emissiometers are therefore designed for broad-band measurements of the infrared reflectance. Glass and metal surfaces are used as high – and low-emitting standards.

不透明的样品的热通量密度对他们的红外反射率是相辅相成的。因此我们emissiometers专为宽带测量红外反射率。玻璃和金属表面是作为高——low-emitting标准。

Emissiometer R

This type is designed for the measurement of tubular samples. The infrared radiation is emitted by a heated semi-cylindrical tunnel, in which the samples (maximum diameter 70mm) have to be placed axially. The reflected radiation is measured integrally in the wavelength range from 8µm to 14µm.

Emissiometer R这种类型的设计是用来测量的管壳式样品。红外辐射发射加热,具有隧道最大横径管样品(轴)必须被放置的地方。反射辐射测量在波长范围从整体到14µm 8µm。

Emissiometer K1

This type is designed for measurements of plane surfaces. The diffuse infrared radiation comes through the exit hole of a diffuse-gold coated integrating sphere with a diameter of 50mm. The measured area has a diameter smaller than 10mm. The reflected radiation is measured integrally in the wavelength range from 8µm to 14µm

Emissiometer K1这种类型是专为测量飞机的表面。漫反射红外辐射来通过出口孔涂层的diffuse-gold积分球,直径50毫米。直径的测量的面积小于10毫米。反射辐射测量在波长范围从整体到14µm 8µm

EmissiometerK2

This type has an additional detector which is sensitive around a wavelength of 5.1µm for measurements of highly selective solar absorber coatings.

Emissiometer K2这种类型拥有一个额外的检测器波长敏感的5.1µm周围进行度量的高度选择性的太阳能吸收涂层。

Emissiometer K3

This type has an additional detector which is sensitive around a wavelength of 3.9µm for measurements of highly selective solar absorber coatings for the application as medium to high temperature absorbers.

Emissiometer K3这种类型拥有一个额外的检测器波长敏感的3.9µm周围进行度量的高度选择性吸收涂层的太阳能应用高温吸波材料,作为工作介质。

U-meter

The U-meter is especially designed for the measurement of the u-value of windows and will be ready for sale soon

U-meter主要适合的U-meter测量中的u-value的窗户,将准备销售很快