供应可编程数控直流电源

产品型号/规格                        JBP-150

最大输出

0 ~ 30V / 0  – 5A

最大功率                                  150W

Programmable  Accuracy

电压： 0.06% +  10mV           

电流： 0.1% +  5mA

Ripple & Noise

（20Hz-20MHz）

电压（ms/p-p）:  1.5mV / 10mV ,   

电流: 10mA

Readback  Accuracy             电压：  0.06% +  15mV       

                                                  电流：  0.1% +   8mA  

Load Regulation

电压： 7mV                     

电流： 5mA

Line Regulation

电压： 3mV                 

电流： 2mA

Control Resolution                电压： 1mV                     

                                                   电流： 0.1mA

Auto Sequence (Dynamic)

 Auto Run Step: Max 100 steps

Setting Time: 1ms – 50,000s(per 10us)

Slope Time: 1ms – 50s(per 10us)

Counter: 1 – 50,000 cycle (0 set : ∞)

Protection Setting

 Over Voltage / Over Temperature(only heat sink 85℃)

Tansient Recovery Time       100us (50% load change, min load 0.5A)

Memory Address

 Max. 100points(Voltage, Current , Time , Slope)

选购附件

可选配RS-232, GPIB配置

使用电源                                   AC 100V/120V/220V+10%, 230V +10%~ -6%, 50/60Hz

附件                                           电源线 x 1, 操作手册 x 1