高频试验机 13709181703
Resonant Testing Maschine TESTRONIC

The concept of the resonant testing machine TESTRONIC is based on the latest possibilities in resonant testing machine engineering.
Many decades of experiences in devloping and manufacturing of resonant testing machines and also our continuous task to support our customers in their testing needs are the benefit .

The main application for a resonant testing machine are tests with a large number of load cycles. On the machine table with T-Nuts is possible to perform complicate test arrangements. The daylight of 500 mm between the columns allows the installation of a furnace, environmental or vacuum chamber.

Data
Executions in steps of 50 / 100 / 150 / 250 kN

dynamic stroke:
static stroke / displacement:
operating frequency:
power consumption magnet:
power requirements:
weight:

up to 8 mm
up to 600 mm
40-300 Hz
< 500 Watt
230 V / 16 A
3000 kg

Measures of the TESTRONIC as PDF document:
TestronicMasse.pdf (18 KB)

brochure TESTRONIC (1.1 MB)

Resonant Testing Machine MIKROTRON

The resonant testing machine MIKROTRON is the small and comPACt execution of the TESTRONIC, designed for smaller loads applicable to standard specimens and components. The T-nuts in the machine table allow to perform complicate test arrangements. The daylight of 500 mm between the columns allows the installation of a furnace, environmental or vacuum chamber.

The simple and successful machine concept is also available in horizontal design, e.g. for corrosion tests.

Data
Execution as 5 kN and 20 kN machine

dynamic stroke:
static stroke / displacement:
operating frequency:
power consumption magnet:
power requirements:
weight:

up to 4 mm
up to 450 mm
40-250 Hz
< 500 Watt
230 V / 10 A
600 kg

Measures of the MIKROTRON as PDF document:
MikrotronMasse.pdf (18 KB)

brochure MIKROTRON (982 KB)

Resonant Testing Maschine VIBRO-FORTE The resonant testing machine VIBRRO-FORTE is the latest development of RUMUL. The design of the VIBRO-Forte 500 is based on a strict further development of the resonant system MAGNODYN. An ideal solution has be found to test long shape components like fasteners, reinforcement steel bars, etc. and round and flat specimens. The changeable frequency range is between 50 and 160 Hz depending on the stiffness of the specimen. Noteworthy is the low weight of a testing machine at this high capacity. Data Executions 500 kN
	dynamic stroke: static stroke / displacement: operating frequency: power consumption magnet: power requirements: weight:	up to 4 mm up to 600 mm 40-160 Hz < 3 kW 400 V / 16 A 3400 kg
	Measures of the VIBRO-Forte as PDF document: VIBRO-Forte Layout (197 KB) brochure VIBRO-Forte (114 KB)