二手20GHZ微波频率计 EIP 25B

• Carrier signal measurement
• Transmitter frequency verification
• Channel specific signal measurements
• Microwave link testing
• Channel monitoring

Phase Matrix's 25B/28B at a glance

• Keyboard controlled frequency limit selection
• Power Measurement to 0.1 dB resolution
• Power Measurement accuracy to ±0.5 dB typical
• -30 dB sensitivity
• 200 Watt (+53 dBm) peak damage protection
• 10 dB automatic amplitude discrimination
• 200 ms acquisition time
• Up to 800 MHz/sec tracking speed
• 20 MHz P-P FM tolerance up to a 10 MHz rate

Selective Frequency and Power Measurements

With a single connection, the Phase Matrix 25B/28B counters can simultaneously measure and display the input signal's frequency and power level in the microwave band, eliminating the need for a separate microwave power meter. Within the 25 MHz bandwidth of the YIG-preselector, only the selected signals frequency and power are measured. Signals to be analyzed are selected by keystroke entry of an individual center frequency, or a search range between a high and low frequency limit. This signal selectivity, combined with 20 MHz of FM tolerance at all rates up to 10 MHz, allows the Phase Matrix 25B/28B to make accurate frequency and power level measurements even while the input signal is carrying traffic; there is no need to take the transmitter; or adjacent channels, off the air for routine checks.

Easy to Read and Operate

Frequency and power measurements can be made to a resolution of 1 Hz and 0.1 dB, respectively. Easy keystroke entry of frequency and power offsets allows system-under-test frequency translation devices and cable losses to be compensated for in the displayed measurement results.