气动油压测量仪DI-IM-IP500-CK365测控网

Management of air tool / oil pulse tool

仠Torque Tester 丂DI-1M-IP丂series

Management of an oil pulse tool etc.

High precisionlightweight small.
The best for everyday check of an oil pulse tool.
Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions.
Since it is lightweightsmall, it can install in a work line.
Convenient for the scheduled inspection of a tool
It is brightreadable at an LED display.
The high luminosity (light emitting diode) LED can be adopted as a display element,
and measured value can be read also in a dark place
It can use also for a torque wrench.
It can be used also for management of a torque wrench angle nut runner besides an
oil pulse wrench.

The main features
仩Blow counter. The total number of blows within fixed timetorque measured value are displayed.
仩 Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode.
仩RS232C Output. It connects with data printing (printer use corresponding to RS232C),a personal computer,data can be saved easily.(Taking-in soft use of exclusive use)
仩 It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc.

Specification		俢俬-侾俵-俬俹俆侽	俢俬-侾俵-俬俹俀侽侽	俢俬-侾俵-俬俹俆侽侽
Measuring range (at the time of Track)		0.30乣50 N 3.0乣500 kgf丒cm 3.0乣430 lbf丒in	3.0乣200 N 30乣2000 kgf丒cm 30乣1800 lbf丒in	3.0乣500 N 30乣5000 kgf丒cm 30乣4500 lbf丒in
Peak down Operating range		0.70N?/span>m乣, 7.0kgf丒cm/ lbf丒in乣	7.0N?/span>m乣, 70kgf丒cm/ lbf丒in乣
Accuracy		亇0.5亾乮F/S乯(499 or less digit亇3digit)
Display		The 4 figures digital display of LED
The measurement direction		CW-CCW (rightleft)
Measuring mode	P-P Peak	Peak load value hold
	T-R Track	Indication of real time torque value.
	P-D Peak down	Indication peak down pointhold.
Display zero clearance		Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
Blow	Measurement range	Zero to 99 blow
	Measurement time	0.1 - 9.9 seconds
Data output		RS232C conformity (baud rate 9600)
Power supply		Ni-Cd chargeable battery 1.2V亊5cells 700mAh
Auto power save		5 minutes no use, automatically switch off.
Charging time		From empty - less than 6hours
Continunous working time		8 hours
Meter part丂Weight		About 600g
Detection part丂Weight		about 600g	about 1kg	about 2.5kg
Meter part丂Outside size		146(W)亊115(D)亊48(H) 乮It does not contain by the projection part乯
CODe length		Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories (one piece each)		Attache case	乗	乗
		AC/DC adaptor (Please choose AC adaptor out of 120V,230V.)
		An inspection report, a proofreading certificate, traceability system figure