Reflex10M是最新加入到参数继电器测试系统提供低成本进入到MIL SPEC继电器测试的范围。该系统是基于流行的反射10架构,但增加了两个AC线圈电源的能力和在一个单位ASY0700高电流接触电流测量能力
主要特点
-
多达4个形式C触点和30V/10A接触载荷测试交流及直流线圈(包括直流闭锁)继电器。
-
执行所有基本的继电器测试。
-
操作简单,生产测试。
-
完整的数据记录。
-
符合MIL-PRF-83536标准。
-
测试程序的兼容性,与RT290Reflex10,Reflex20,Reflex510。
-
菜单式编程。
-
全自动处理程序,并基于电磁测试夹具支持。
Reflex 10M is a medium power,high-performance parametric relay test system designed for production testing and detailed engineering analysis of electro-mechanical relays.
Overview
Relays up to 4 poles and two AC or DC coils can be
tested, including form A, B, C contact styles. Low
level, intermediate and medium power contact load
currents up to 10 Amps can be programmed to test in
accordance with the MIL-PRF-83536A electrical
test procedure.
The Reflex 10M complements the ART range of test
equipment to provide low cost, high quality test
capability ideally suited to manual production lines
and engineering “quick look” analysis. ART’s common
user interface provides compatibility across the
RT290 and Reflex parametric product ranges. The
PC parallel port connection provides portability and
allows the system to be shared between test stations.
The system provides four terminal Voltage-Drop
based contact resistance measurement and is based
on ART’s popular REFLEX 10 architecture with the
addition of two major new features:
• AC or DC coil drive capability
• High-current contact load measurement up to
30V / 10 Amps DC
Key Features
• Compliant with MIL 83536A & 6106L
• Form A, B, C contact styles
• Up to four changeover contacts
• Contact Loads up to 30V / 10 Amps DC
• AC and DC coil drive
• Easy to Use Artworks software
• Comprehensive data logging
• Automatic report generation
• Built in functional test.
Low/medium power contact loads 30mV / 10mA, 28V / 100mA or 6V / 10mA
High power contact loads 0 - 30V / 0 - 10A
Max no. contacts 4 pole change over
Coil types Monostable / single or dual coil latching
DC coil drive 0 – 80V / 400mA (0-370 V and 0-1A options)
AC coil drive 0 – 230Vrms / 20 W @ 50, 60 or 400 Hz
Product Features
COMPANY NO. 02715226
See also:
Reflex 10 low voltage relay
test system
The following comprehensive range of relay test types is provided
to meet MIL-PRF-83536A Electrical Characteristics Tests:
• Fixture check
• Coil resistance / current
• Contact resistance (static contact resistance)
• Contact voltage drop
• Operate and release voltage, including:
Pick-up voltage
Hold voltage
Drop-out voltage
• Timing measurement, including
Operate / release time
Contact simultaneity
Break before make
Contact bounce
Contact break bounce
• Dynamic CR, including
Dynamic contact resistance
Contact stabilisation time
• Coil back EMF
• Neutral screen
• Coil diode confirm present or absent
• Internal shorts test.
Features
AC & DC Coil Drive: Features both AC and DC coil drive
capability.
Contact loads
The system incorporates a high power supply, which is used
when measuring contact voltage drop (CVD) at up to 10 Amps.
The power supply current and voltage are programmed from
within the Artworks test program environment.
Device Interface
The front panel mounted 37 way high power circular connector
is used for the four terminal contacts connections and a
separate 37 way subminiature D-type connector for the two
wire coil connections.
Software
The Artworks operator display presents the user with a clear
view of the test data. Test programs can be quickly loaded or
new programs created using the test program wizard. Data
logging can be enabled or disabled by the operator as required.
Functional Test
A comprehensive set of functional checks are run when the
software initialised. Power rail and system temperature
monitoring features are also measured along with basic system
measurement functionality.
Fixture Control
The front panel 37 way D Type connector also provides control
signals including: Start, Re-Test, Pass and Fail status plus
solenoid control.
Fixture Identification
The system provides the ability to interrogate an EEPROM IC
within a relay fixture in order that only relay test programs
that are compatible with the chosen fixture are displayed when
loading test programs.
Built-in manual control tool
Simple to use coil control sliders and contact monitoring to assist
manual contact adjustments.