Fluke 753 多功能校准器，Fluke 753 记录过程校准仪-CK365测控网

Fluke 753 多功能校准器，Fluke 753 记录过程校准仪

福禄克Fluke 753 多功能校准器|Fluke 753 多功能校准器-基睿仪器|Fluke 753 记录过程校准仪

记录过程校准仪新环境拍照苛刻环境下更易使用

753电流信号发生器是一款强大的多功能记录过程校准器，使用该校准器，您可以下载用软件创建的程序、列表和说明，或者上传数据进行打印、归档和分析。753电流信号发生器还特别内置了功能强大的HART®接口，您现在通过单独的通信器执行的所有日常任务几乎都可以使用该接口来完成。

Measurement Accuracy

Voltage DC

	1 Year	2 Years
100.000 mV	0.02%+0.005 mV	0.03%+0.005 mV
3.00000 V	0.02%+0.00005 V	0.03%+0.00005 V
30.0000 V	0.02%+0.0005 V	0.03%+0.0005 V
300.00 V	0.05%+0.05 V	0.07%+0.05 V

记录过程校准仪

Voltage AC

Range 40 to 500 Hz	Resolution	1 Year	2 Years
3.000 V	0.001 V	0.5%+0.002 V	1.0%+0.004 V
30.00 V	0.01 V	0.5%+0.02 V	1.0%+0.04 V
300.0 V	0.1 V	0.5%+0.2 V	1.0%+0.2 V

Current DC

	1 Year	2 Years
30.000 mA	0.01% + 5 uA	0.015%+7 uA
110.00 mA	0.01% + 20 uA	0.015%+30 uA

Resistance

	1 Year	2 Years
10.000 Ω	0.05% + 50 mΩ	0.07%+70 mΩ
100.00 Ω	0.05% + 50 mΩ	0.07%+70 mΩ
1.0000 kΩ	0.05% + 500 mΩ	0.07%+0.5 Ω
10.000 kΩ	0.1% + 10 Ω	0.15%+15 Ω

Frequency

	Resolution	Accuracy (2 Years)
1.00 to 110.00 Hz	0.01 Hz	0.05 Hz
110.1 to 1100.0 Hz	0.1 Hz	0.5 Hz
1.101 to 11.000 kHz	0.001 kHz	0.005 kHz
11.01 to 50.00 kHz	0.01 kHz	0.05 kHz

记录过程校准仪

Source Accuracy

Voltage DC

	1 Year	2 Years
100.000 mV	0.01%+0.005 mV	0.015%+0.005 mV
1.00000 V	0.01%+0.00005 V	0.015%+0.0005 V
15.0000 V	0.01%+0.0005 V	0.015%+0.0005 V

Current DC

	1 Year	2 Years
22.000 mA (Source)	0.01%+ 0.003 mA	0.02%+ 0.003 mA
Current Sink (Simulate)	0.02% + 0.007 mA	0.04% + 0.007 mA

Resistance

	1 Year	2 Years
10.000 Ω	0.01% + 10 mΩ	0.015% + 15 mΩ
100.00 Ω	0.01% + 20 mΩ	0.015% + 30 mΩ
1.0000 kΩ	0.02% + 0.2 Ω	0.03% + 0.3 Ω
10.000 kΩ	0.02% + 3 Ω	0.03% + 5 Ω

Frequency

	2 Years
0.1 to 10.99 Hz	0.01 Hz
0.01 to 10.99 Hz	0.01 Hz
11.00 to 109.99 Hz	0.1 Hz
110.0 to 1099.9 Hz	0.1 Hz
1.100 to 21.999 kHz	0.002 kHz
22.000 to 50.000 kHz	0.005 kHz

记录过程校准仪

Technical Data

Data Log Functions

Measure functions:	Voltage, current, resistance, frequency, temperature, pressure
Reading rate:	1, 2, 5, 10, 20, 30, or 60 readings/minute
Maximum record length:	8000 readings (7980 for 30 or 60 readings/minute)

Ramp Functions

Source functions:	Voltage, current, resistance, frequency, temperature
Rate:	4 steps/second
Trip detect:	Continuity or voltage (continuity detection not available when sourcing current)记录过程校准仪

Loop Power Function

Voltage:	Selectable, 26 V
Accuracy:	10%, 18 V minimum at 22 mA
Maximum current:	25 mA, short circuit protected
Maximum input voltage:	50 V DC

Step Functions

Source Functions	Voltage, current, resistance, frequency, temperature
Manual Step	Selectable step, change with arrow buttons
Autostep	Fully programmable for function, start delay, stepvalue, time per step, repeat

Environmental Specifications

Operating Temperature

-10 °C to +50 °C

Storage Temperature

-20 °C to +60 °C

Dust/water resistance

Meets IP52, IEC 529

Operating Altitude

3000 m above mean sea level (9842 ft)

Safety Specifications

Agency Approvals

CAN/CSA C22.2 No 1010.1-92, ASNI/ISA S82.01-1994, UL3111, and EN610-1:1993

记录过程校准仪

Mechanical & General Specifications

Size

136 x 245 x 63 mm (5.4“ x 9.6 x 2.5)

Weight

1.2 kg (2.7 lb)

Batteries

Internal Battery PACk Li-ion:

7.2V, 4400mAh, 30 Wh

Battery Life

>8 hours typical

Battery Replacement

Via snap-shut door without opening calibrator; no tools required

Side port connections

	Pressure module connector
	USB Connector to interface to your PC
	Connection for optional battery charger/eliminator

Data storage capacity

1 week of calibration procedures results

90 day specifications

	The standard specification interval for the 750 Series are 1 and 2 years.
	Typical 90 day measurement and source accuracy can be estimated by
	dividing the one year "% of reading" or "%of output" specifications by 2.
	Floor specifications, expressed as "% of full scale" or
	"counts" or "ohms" remain constant.

Temperature, Resistance Temperature Detectors
Degrees or % of reading
Type (α)	Range °C	Measure °C1		Source current	Source °C		Allowable current2
		1 year	2 year		1 year	2 year
100 Ω Pt (385)	-200 to 100 100 to 800	0.07 °C 0.02 % + 0.05 °C	0.14 °C 0.04 % + 0.10 °C	1 mA	0.05 °C 0.0125 % + 0.04 °C	0.10 °C 0.025 % + 0.08 °C	0.1 mA to 10 mA
200 Ω Pt (385)	-200 to 100 100 to 630	0.07 °C 0.02 % + 0.05 °C	0.14 °C 0.04 % + 0.10 °C	500 μA	0.06 °C 0.017 % + 0.05 °C	0.12 °C 0.034 % + 0.10 °C	0.1 mA to 1 mA
500 Ω Pt (385)	-200 to 100 100 to 630	0.07 °C 0.02 % + 0.05 °C	0.14 °C 0.04 % + 0.10 °C	250 μA	0.06 °C 0.017% + 0.05 °C	0.12 °C 0.034 % + 0.10 °C	0.1 mA to 1 mA
1000 Ω Pt (385)	-200 to 100 100 to 630	0.07 °C 0.02 % + 0.05 °C	0.14 °C 0.04% + 0.10 °C	150 μA	0.06 C 0.017 % + 0.05 °C	0.12 C 0.034 % + 0.10 °C	0.1 mA to 1 mA
100 Ω Pt (3916)	-200 to 100 100 to 630	0.07 °C 0.02 % +0.05 °C	0.14 °C 0.04 % +0.10 °C	1 mA	0.05 °C 0.0125 % + 0.04 °C	0.10 °C 0.025 % + 0.08 °C	0.1 mA to 10 mA
100 Ω Pt (3926)	-200 to 100 100 to 630	0.08 °C 0.02 % +0.06 °C	0.16 °C 0.04 % +0.12 °C	1 mA	0.05 °C 0.0125 % + 0.04 °C	0.10 °C 0.025 % + 0.08 °C	0.1 mA to 10 mA
10 Ω Cu (427)	-100 to 260	0.2 °C	0.4 °C	3 mA	0.2 °C	0.4 °C	0.1 mA to 10 mA
120 Ω Ni (672)	-80 to 260	0.1 °C	0.2 °C	1 mA	0.04 °C	0.08 °C	0.1 mA to 10 mA

1For two and three-wire RTD measurements, add 0.4°C to the specifications.
2Supports pulsed transmitters and PLCs with pulse times as short as 1 ms

Temperature, Thermocouples记录过程校准仪
Type	Source °C	Measure °C		Source °C
		1 year	2 years	1 year	2 years
E	-250 to -200	1.3	2.0	0.6	0.9
	-200 to -100	0.5	0.8	0.3	0.4
	-100 to 600	0.3	0.4	0.3	0.4
	600 to 1000	0.4	0.6	0.2	0.3
N	-200 to -100	1.0	1.5	0.6	0.9
	-100 to 900	0.5	0.8	0.5	0.8
	900 to 1300	0.6	0.9	0.3	0.4
J	-210 to -100	0.6	0.9	0.3	0.4
	-100 to 800	0.3	0.4	0.2	0.3
	800 to 1200	0.5	0.8	0.3	0.3
K	-200 to -100	0.7	1.0	0.4	0.6
	-100 to 400	0.3	0.4	0.3	0.4
	400 to 1200	0.5	0.8	0.3	0.4
	1200 to 1372	0.7	1.0	0.3	0.4
T	-250 to -200	1.7	2.5	0.9	1.4
	-200 to 0	0.6	0.9	0.4	0.6
	0 to 400	0.3	0.4	0.3	0.4
B	600 to 800	1.3	2.0	1.0	1.5
	800 to 1000	1.0	1.5	0.8	1.2
	1000 to 1820	0.9	1.3	0.8	1.2
R	-20 to 0	2.3	2.8	1.2	1.8
	0 to 100	1.5	2.2	1.1	1.7
	100 to 1767	1.0	1.5	0.9	1.4
S	-20 to 0	2.3	2.8	1.2	1.8
	0 to 200	1.5	2.1	1.1	1.7
	200 to 1400	0.9	1.4	0.9	1.4
	1400 to 1767	1.1	1.7	1.0	1.5
C	0 to 800	0.6	0.9	0.6	0.9
	800 to 1200	0.8	1.2	0.7	1.0
	1200 to 1800	1.1	1.6	0.9	1.4
	1800 to 2316	2.0	3.0	1.3	2.0
L	-200 to -100	0.6	0.9	0.3	0.4
	-100 to 800	0.3	0.4	0.2	0.3
	800 to 900	0.5	0.8	0.2	0.3
U	-200 to 0	0.6	0.9	0.4	0.6
U	0 to 600	0.3	0.4	0.3	0.4
BP	0 to 1000	1.0	1.5	0.4	0.6
	1000 to 2000	1.6	2.4	0.6	0.9
	2000 to 2500	2.0	3.0	0.8	1.2
XK	-200 to 300	0.2	0.3	0.2	0.5
XK	300 to 800	0.4	0.6	0.3	0.6

Model Name

Description

Fluke 753

记录过程校准仪包括：文档化全功能过程校准器/电流信号发生器：

· BC7240 电池充电器

· BP7240 锂离子电池组

· DPCTrack 2 ™ 软件

· 说明书记录过程校准仪

· 可溯源的 NIST 校准报告和数据

· 三套 TP220 测试探头和三套“长齿”鳄鱼夹

· 两套 AC280 钩夹线钩

· C799 现场软携包

· USB 通信线缆

新款753中的功能可以满足您的全部所需，743B和其他电流信号发生器系列产品也将会不断推陈出新！753电流信号发生器可以当做多个工具使用-‐利用该功能强大的手持设备，可以输出、模拟和测量压力、温度和电信号。改进的全新图形屏幕、使用寿命更长的锂离子电池、USB端口以及软件包中新增的附件定会博取您的衷爱。对于记录功能，753电流信号发生器可自动执行校准程序并捕获数据。当然，它还可帮助您满足ISO9000、FDA、EPA和OSHA法规等多项严格标准。福禄克753记录过程校准器：更智能。更快捷。更智能。更快捷。

记录过程校准仪

上海基睿仪器是福禄克fluke华东总代理，专业销售服务福禄克仪器的专业公司，产品主要有红外线热像仪，热成像仪，示波器，万用表，钳形表，激光测距仪，接地电子测试仪，绝缘电阻测试仪等产品，欢迎来电咨询订购。电话：021-60516431 15026753385 18001836270 上海基睿仪器官方网站:www.juovi.com

www.juovi.com www.fluke-china.com www.kimo17.cn www.twtes.cn

www.kewltd.cn www.hioki-china.com www.smart-sensor.cn

www.center-sh.com www.testo-china.cn www.twaz17.com

www.tenmars-china.com www.juovi.net

噪音计 风速仪 绝缘电阻测试仪 蓄电池检测仪噪音频谱分析仪 卤素检漏仪

温湿度计激光测距仪烟气分析仪红外热像仪红外线测温仪基睿仪器

公司联系方式

基睿电子科技（上海）有限公司 [加为商友]
联系人杨旭(女士)
地区上海
地址中国上海市闵行区上海闵行区碧江路329弄39号

相关产品