电源线弯曲试验机供应图片

电源线弯曲试验机FL-1

Flexing Test Swivel Machine FL-1

产品概述：本装置符合GB2099.1-2008图21、UL817、VDE0620、IEC884.1图21等标准要求，用于考核不可拆线电源插头（或端子）的耐弯曲性能，检验电源插头端子的牢固程度。

弯曲角度：左右各45°、60°、90°（或180°）；

弯曲速率：10～60rpm（速度可调）；

负载砝码：20N、10N、500g、284g、113g（或制订）；

试验次数：可按标准要求预置(六位显示)；

测试工位：6工位。

Products Information

Product details: ModelFL-1

TheFL-1Plug Cord Flexibility Tester can test six cables or cords fitted with plugs simultaneously. This improves testing caPACity. IEC 60884-1 calls for 10,000 flexing at a rate of 60 flexing per minute. Halfway through the test, the cords need to be rotated 90°. The plug sockets are designed to make this rotation easy and accurate. The HT Tester has individual station counters so that any failure data can be retrieved by station.
The cables are connected to a socket and the tail of the cable is connected to the tester to detect if an internal fault occurs with the cable wiring or accessory connection.
The instrument starts in a vertical orientation and then flexes the specimens 45° on either side of the vertical for a total 90° of flexing. A standard rate of 60 flexing per minute is used but a slower rate can be selected if desired.
A set of customer selected weights are included with the instrument so that the proper force can be applied to the cable during the test.