| 类型： | 数字存储示波器 | 品牌： | Gwinstek/固纬 |
| 型号： | GRS-6032 | | |
特点：*DC~30MHz, 20MSa/s, 2kW/CH x2*500MSa/s等效采样率*10组波形存储/调出*前置触发功能*滚动模式*ALT-MAG 功能（x5, x10, x20）*平滑功能 ON/OFF*最大扫描速度10ns/DIV*游标直读功能：△V，△T，1/△T*10组面板设定存储/调出*平均功能（2~256）*VERT模式触发*TV同步触发*CH1信号输出 & Z轴输入*RS-232C接口规格：
CRT | Type | 6-inch rectangular type with internal graticule;0%, 10%, 90% and 100% markers.8 x 10 DIV (1 DIV = 1 cm) |
| Accelerating Potential | Approx. 10kV (GRS-6052),2kV (GRS-6032) |
| INTEN and FOCUS | Front panel control. |
| Illumination | Provided |
| Trace Rotation | Provided. |
| Z-axis Input(REAL TIME modeonly) | Sensitivity: at least 5VPolarity: positive going input decrease intensityUsable frequency range: DC to 2MHz.Max. input voltage: 30V (DC +AC peak) at 1kHzor less.Input Impedance: approx. 33kΩ(GRS-6052)47kΩ(GRS-6032) |
| VERTICAL SYSTEM | Sensitivity Accuracy | 1mV~2mV/DIV±5%, 5mV~20V/DIV±3%, 14 calibrated steps in 1-2-5 sequence. |
| Vernier VerticalSensitivity | Continuously variable to 1/2.5 approx. of panel indicate value. |
| Bandwidth(-3dB) andRise Time | GRS-6052 | Bandwidth(-3dB) | Rise Time |
| 5mV~20V/DIV | DC~50MHz | Approx. 7ns |
| 1mV~2mV/DIV | DC~7MHz | Approx. 50ns |
| GRS-6032 | Bandwidth(-3dB) | Rise Time |
| 5mV~20V/DIV | DC~30MHz | Approx. 11.7ns |
| 1mV~2mV/DIV | DC~7MHz | Approx. 50ns |
| Maximum Input Voltage | 400V (DC + AC peak) at 1kHz or less. |
| Input Coupling | AC, DC, GND |
| Input Impedance | Approx. 1MΩ±2% // approx. 25pF |
| Vertical Modes | CH1, CH2, DUAL(CHOP/ALT), ADD, CH2 INV. |
| CHOP Frequency | Approx. 250kHz. |
| Dynamic Range(REAL TIME mode only) | GRS-6052: 8DIV at 40MHz, 6DIV at 50MHZGRS-6032: 8DIV at 20MHz, 6DIV at 30MHz |
| HORIZONTAL SYSTEM (REAL TIME mode) | Sweep Time | 0.2μs/DIV~0.5s/DIV, 20 steps selectable in 1-2-5 sequence, continuous variable control between steps at least 1:2.5. |
| Accuracy | ±3%, ±5% at ×5 and ×10 MAG, ±8% at ×20 MAG |
| Sweep Magnification | ×5, ×10, ×20 MAG |
| Maximum Sweep Time(at MAG) | GRS-6052:20ns/DIV (10ns/DIV uncalibrated)GRS-6032:50ns/DIV(10ns/DIV~40ns/DIV uncalibrated. |
| ALT-MAG Function | Available. |
| TRIGGERSYSTEM | Trigger Modes | AUTO, NORM, TV |
| Trigger Source | VERT-MODE, CH1, CH2, LINE, EXT. |
| Trigger Coupling | AC, HFR, LFR, TV-V(-), TV-H(-). |
| Trigger Slope | “+” or “- ” polarity. |
| Trigger Sensitivity | GRS-6052 | CH1,CH2 | VERT-MODE | EXT |
| 20Hz~5MHz | 0.5 DIV | 2.0 DIV | 200mV |
| 5MHz~40MHz | 1.5 DIV | 3.0 DIV | 800mV |
| 40MHz~50MHz | 2.0 DIV | 3.5 DIV | 1V |
| GRS-6032 | CH1,CH2 | VERT-MODE | EXT |
| 20Hz~2MHz | 0.5 DIV | 2.0 DIV | 200mV |
| 2MHz~20MHz | 1.5 DIV | 3.0 DIV | 800mV |
| 20MHz~30MHz | 2.0 DIV | 3.5 DIV | 1V |
| TV sync pulse more than 1 DIV (CH1, CH2, VERT-MODE) or 200mV (EXT). |
| External Trigger Input | Input impedance: Approx. 1MΩ//25pF(AC coupling)Max. input voltage: 400V (DC + AC peak) at 1kHz. |
| Hold-off Time | Variable (Real Time Mode only). |
| X-YOPERATION(REAL TIME mode) | Input | X-axis : CH1, Y-axis : CH2 |
| Sensitivity | 1mV/DIV~20V/DIV. |
| Bandwidth | X-axis: DC~500kHz (-3dB) |
| Phase Difference | 3°or less from DC to 50kHz |
| DIGITAL STORAGE FUNCTIONS | Acquisition Digitizer | 8 bit ADC × 2 |
| Max. Sampling Rate | 500MS/s for equivalent time sampling.20MS/s for normal sampling. |
| Storage Bandwidth(-3dB) | Single shot: DC to 5MHz.Repetitive : DC to 50MHz (GRS-6052)DC to 30MHz (GRS-6032) |
| Dynamic Range | ±5DIV. |
| Memory LengthAcquisition MemorySave REF MemoryDisplay Memory | 2k words/CH×2, 1k words/CH (equivalent)1k words/CH×10 with back-up memory(REF 0~9)1k words/CH×4 waveform (max.) |
| Sweep Time | Equivalent:0.2μs/DIV ~ 2μs/DIVNormal: 5μs/DIV ~ 0.1s/DIVRoll Mode:0.2s/DIV ~ 100s/DIV |
| Sweep Magnification | ×5, ×10, ×20 |
| Max. Sweep Time | 10ns/DIV |
| MAG Interpolation | Dots, Linear |
| ALT-MAG Function | Available |
| Operation Mode | Auto, Norm, Single, Single-roll, Roll, X-YAverage (2 ~ 256), Run/Stop |
| Smoothing Function | Dot Joint ON/OFF selectable |
| Pre-trigger | 0 ~ 10DIV in 0.02DIV steps (at 5μs/DIV ~ 0.1s/DIV) |
| X-Y Operation | X-axis: CH1, Y-axis: CH2Storage Bandwidth : DC~50MHz (GRS-6052)DC~20MHz (GRS-6032) |
| Display Resolution | H: 100 points/DIVV: 25 points/DIVX-Y: 25 × 25 points/DIV |
| Waveform SAVE/RECALL | 10 sets (REF0 ~ REF9) with back-up memory. |
| OUTPUTSIGNAL | CH1 Signal Output | Voltage: approx. 20mV/DIV (with 50Ω terminal.)Bandwidth: 50Hz to at least 5MHz. |
| Calibrator Output | Voltage: 0.5V±3%,Frequency: approx. 1kHz, square wave. |
| CURSORREADOUT & CONTROL INTERFACE | Panel Setting Display | CH1/CH2 sensitivity, sweep time, trigger condition, digital storage function. |
| Panel Setting Save &Recall | 10 sets |
| Cursor Measurement | Cursor Measurement Function: ΔV, ΔT, 1/ΔT.Cursor Resolution: 1/25 DIV.Effective Cursor Range: Vertical:±3 DIV,Horizontal: ±4 DIV |
| Text Readout Intensity | Adjustable |
| RS232 Interface | Remote control via a PC. |
| LINE POWERREQUIREMENT | Voltage | AC100V, 120V, 230V ±10% selectable. |
| Frequency | 50Hz or 60Hz. |
| Power Consumption | Approx. 70VA, 60W(max). |
| MECHANICALSPEC. | Dimensions | 275(W)×130(H)×370(D) mm. |
| Weights | 8.5 kg |
| OPERATINGENVIRONMENT | Indoor useAltitude up to 2000 mAmbient temperature :To satisfy specifications : 10℃ to 35℃ ( 50°F to 95°F )Maximum operating ranges: 0℃ to 40℃( 32°F to 104°F )Relative humidity: 85% RH(max.) non condensingInstallation Category : IIPollution degree 2 |
| STORAGE TEMPERATURE & HUMIDITY | -10°to 70℃, 70%RH(maximum) |
| ACCESSORIES | Power cord….............……….. 1Instruction manual…………… 1Probe (×1/×10)…………..… 2 |
点击图片查看原图
