加工定制: | 否 | 类型: | 数字示波器 |
重量: | 1(kg) | 型号: | CWT CWT015 |
波形捕获率: | 1(wfms/s) | 记录长度: | 1(k) |
通道数: | 2 | 品牌: | TEK,POWERTEK |
带宽: | 100(MHz) | 外形尺寸: | 1(mm) |
采样率: | 1(GS/s) |
CWT Mini - Rogowski coil current sensor Miniature wideband current probe for current measurement
The CWT Miniature current probes utilize a Rogowski Coil sensor thin enough (typical cross section 3.5mm) to fit in very confined sPACes - often between the legs of a semiconductor power switching device. With high frequency bandwidths up to 20MHz, the CWT miniature Rogowski coil is ideal for measuring switching transients or pulsed currents starting at 300mA up to 300kA in power electronic equipment. The CWT miniature Rogowski probe is aclip around flexible coilcurrent probe based on the Rogowski principle to achieve high bandwidth measurement and faithful conversion of current to voltage, intended for use with oscilloscopes, data loggers, power meters and power analyzers. Available with a 100mm or 200mm length clip-around coil, ensuring easy current monitoring even where access is limited. |
CWT Mini Rogowski Coil | ||
![]() |
| |
|
Selection table for CWT mini range current probes
CWT Mini Rogowski Coil Specifications | |||||||||
Type | Sensitivity (mV/A) |
Peak current
(kA)
Peak di/dt
(kA/uS)
Noise max*1
(mVpk-pk)
Droop
typ.
(%/ ms)
LF (3dB) bandwidthtyp. (Hz)fLPhase lead at 50Hz
typ. (deg)
HF (3dB) bandwidthtyp. (MHz)fH*2Coil Length
100mm
Coil Length
200mm
High Sensitivity Ranges of CWT .... measuring currents from 300mACWT015200.00.030.26.51301502.0@6kHz5.03.5CWT03100.00.060.44.5901052.0@4kHz8.55.5CWT0650.00.120.83.070802.0@3kHz1712CWT120.00.32.02.540501.9@2kHz1712CWT310.00.64.08.03.03.51.0@300Hz1712Standard Ranges of CWT .... measuring currents from 15ACWT65.01.28.014.00.91.01.71712CWT152.03.020.07.00.70.81.31712CWT301.06.025.05.00.50.60.91712CWT600.512.025.03.50.350.40.61712CWT1500.230.025.03.00.20.20.31712CWT3000.160.025.03.00.10.10.21712CWT6000.05120.025.03.00.060.050.11712CWT15000.02300.025.03.00.0350.030.061712
*1. Distributed around thefL(3dB) bandwidth.
*2
. The high frequency bandwidth is in part dependent on coil length. Contact Powertek for values offHfor other coil lengths
Get Datasheet on CWT LF Mini (Low frequency mini version)
TYPICAL ACCURACY (full scale) | Calibrated toUKAS±0.2% with conductor central in the loop Variation with conductor position in the coil loop typically ±2% | ||
TYPICAL LINEARITY | ±0.05% (full scale) | ||
ABSOLUTE MAXIMUM VALUES OFdi / dt(kA/µs) (value must not be exceeded) | CWT 015, 03, 06 CWT 1N all other CWT’s | PEAK25.0 PEAK 25.0PEAK25.0 | RMS0.6 @ 70oC RMS 1.0 @ 70oCRMS1.2 @ 70oC (further information available on request) |
Coil and cable | ||
COIL CIRCUMFERENCE ‘A’ (mm) | 100 or 200mm | |
COIL CROSS SECTION ‘B’ (mm) | 3.5mm for 2kV isolation 4.5mm for 5kV isolation | |
PEAK COIL VOLTAGE ISOLATION (kV) | 2 or 5kV | |
Safe peak working voltage to earth. 2kV coils are flash tested at 3.8kV/60Hz for 60 seconds and 5kV coils are flash tested at 8kVrms/60Hz for 60 seconds. Information about the continuous use of coils at high voltage can be obtained from Powertek | ||
TEMPERATURE RANGE (oC) | -20oC to 100oC | |
For de-rating due to temperature cycling please consult Powertek | ||
CABLE LENGTH (metres)(from box to coil) | 2.5m or 4m. Max cable length for CWT015 is 1m, CWT03 is 1.5m, CWT06 is 2.5m |
Power input - mechanical - environmental | |
POWER SUPPLY | All CWT units are supplied with four AA Lithium batteries (typical life 90 hours) and a 12V-24Vdc input socket and a power adapters (AC to 12Vdc), to power the CWT from 230Vac or 115Vac.Specify adapter type, 230Vor115 V Rechargeable batteries,option R, are available. (batteries are charged whenever external +12V dc supply is present). Typical recharge time 40 hrs, typical life 8 hrs. |
INTEGRATOR BOX DIMENSIONS (mm) | H =183mm, W = 93mm, D = 32mm |
OUTPUT SOCKET | BNC (output impedance 50 ohms- unit supplied with 0.5m BNC-BNC coaxial cable) |
MIN. OUTPUT LOADING | 100kohm (for rated accuracy) |
TEMPERATURE RANGE (oC) | 0oC to 40oC |
Ordering | Model CWT mini unit is supplied with bnc-bnc cable, 12-24Vdc input, 4 AA batteries, power adapter, user manual, calibration certificate and carry case. | / | Cable length (m) | / | Coil circumference (mm) | / | Insulation (kV) |
e.g. order CODe 30Apk, 4 AA Batteries, ac adapter, 12-24Vdc input, 1metre cable, 100mm coil, 5kV insulation | CWT015B | / | 1 | / | 100M | / | 5 |
e.g. order code 6kApk, 4 AA Batteries, ac adapter, 12-24Vdc input, 2.5 metre cable, 200mm coil, 2kV insulation | CWT30B | / | 2.5 | / | 200M | / | 2 |
e.g. order code 120Apk, 4 x AA rechargeable Batteries, internal battery charger, ac adapter, 12-24Vdc input, 2.5metre cable, 100mm coil length and 5kV isolation | CWT06R | / | 2.5 | / | 100M | / | 5 |
If you have any queries regarding theCWTor require specifications outside our standard ranges please do not hesitate to contact us
- 上海日意电子科技有限公司 [加为商友]
- 联系人袁朝辉(先生)
- 地区上海
- 地址中国 上海市 闵行区莘福路388号1号楼722室