| Vertical System |
Model
| | WaveRunner 204MXi-A
| WaveRunner 104MXi-A | WaveRunner 64MXi-A | WaveRunner 44MXi-A |
Nominal Analog Bandwidth @ Ω 50 10 mV-1 V/div
| | 2 GHz
| 1 GHz | 600 MHz | 400 MHz |
Rise Time (typical)
| | 180 ps
| 300 ps | 500 ps | 875 ps |
Input Channels
| | 4
| 4 | 4 | 4 |
Bandwidth Limiters
| | 20 MHz; 200 MHz
|
Input Impedance
| | 1 MΩ || 20 pF or 50 Ω
| 1 MΩ || 20 pF or 50 Ω | 1 MΩ || 16 pF or 50 Ω | 1 MΩ || 16 pF or 50 Ω |
Input Coupling
| | 50 Ω: DC, 1 MΩ: AC, DC, GND
|
Maximum Input Voltage
| | 50 Ω: 5 Vrms, 1 MΩ: 400 V max. (DC + Peak AC = 5 kHz)
|
Input Connector
| | ProBus/BNC
|
Vertical Resolution
| | 8 bits; up to 11 with enhanced resolution (ERES)
|
Sensitivity
| | 50 Ω: 2 mV/div? V/div fully variable; 1 MΩ: 2 mV?0 V/div fully variable
|
Offset Range
| | ?00 mv@2?.95 mv/div, ? V@5?9 mv/div, ?0 V @ 100 mv? V/div, ?00V @ 1.02?0 V/div; 1 M O: ?00 mv @ 2?.95 mv/div, ? V @ 5?9 mv/div, ?0V @ 100 mv? V/div, ?00V @ 1.02?0 V/div
|
|
| Main Specifications |
Probes
| | One PP007 per channel standard; Optional passive and active probes available.
|
|
| Timebase System |
Roll Mode
| | User selectable at <= 500 ms/div and <= 100 kS/s
|
|
| Horizontal System |
Timebases
| | Internal timebase common to all input channels; an external clock may be applied at the auxiliary input
|
Time/Division Range
| | Real time: 200 ps/div?0 s/div, RIS mode: 200 ps/div to 10 ns/div, Roll mode: up to 1,000 s/div
|
Clock Accuracy
| | <= 5 ppm @ 25 蚓 (typical) (<= 10 ppm @ 5?0 蚓)
|
Trigger and Interpolator Jitter
| | Jitter <=3 ps rms (typical)
|
Sample Rate and Delay Time Accuracy
| | Equal to Clock Accuracy
|
Channel-Channel Deskew Range
| | ? x time/div setting, 100 ms max., each channel
|
External Sample Clock
| | DC to 600 MHz; (DC to 1 GHz for 104Xi and 204Xi) 50 Ω, (limited BW in 1 MΩ), BNC input, limited to 2 Ch operation (1 Ch in 62Xi-A), (minimum rise time and amplitude requirements apply at low frequencies)
|
|
| Acquisition System |
Single-Shot Sample Rate/Ch
| | 5 GS/s
|
Interleaved Sample Rate (2 Ch)
| | 10 GS/s
|
Random Interleaved Sampling (RIS)
| | 200 GS/s
|
RIS Mode
| | User selectable from 100 ps/div to 10 ns/div
|
Maximum Trigger Rate
| | 1,250,000 waveforms/second
|
Acquisition Memory Options
| | Max. Acquisition Points (4 Ch/2 Ch, 2 Ch/1 Ch in 62Xi-A) Segments (Sequence Mode)
|
Sequence Time Stamp Resolution
| | 1 ns
|
Standard
| | 12.5M/25M 10,000
|
|
| Acquisition Processing |
Averaging
| | Summed and continuous averaging to 1 million sweeps
|
Enhanced Resolution (ERES)
| | From 8.5 to 11 bits vertical resolution
|
Envelope (Extrema)
| | Envelope, floor, or roof for up to 1 million sweeps
|
Interpolation
| | Linear or (Sinx)/x
|
Time Resolution (min, Single-shot)
| | 100 ps (10 GS/s)
|
|
| Triggering System |
Trigger Modes
| | Normal, Auto, Single, Stop
|
Sources
| | Any input channel, External, Ext/10, or Line; slope and level unique to each source, except Line
|
Coupling
| | DC, AC (typically 7.5 Hz), HF Reject, LF Reject
|
Pre-trigger Delay
| | 0?00% of memory size (adjustable in 1% increments, or 100 ns)
|
Post-trigger Delay
| | Up to 10,000 divisions in real time mode, limited at slower time/div settings in roll mode
|
Hold-off by Time or Events
| | 1 ns to 20 s or 1 to 1,000,000,000 events
|
Internal Trigger Range
| | ?.1 div from center (typical)
|
Trigger Sensitivity with Edge Trigger (Ch 1?)
| | 2 div @ < 2 GHz 1 div @ < 200 MHz
|
External Trigger Input Range
| | EXT/10 ? V; EXT ?00 mV
|
Max. Trigger Frequency, SMART Trigger
| | 2 GHz @ = 10 mV
|
Minimum Time Between Sequential Segments Sequential Segments
| | 800 ns
|
|
| Basic Triggers |
Edge
| | Triggers when signal meets slope (positive, negative, or Window) and level condition.
|
TV-Composite Video
| | Triggers selectable fields (1, 2, 4, or 8), Positive or Negative slope, or Line (up to 1500), for NTSC, PAL, SECAM, or non-standard video (up to 1500 lines).
|
|
| SMART Triggers |
State or Edge Qualified
| | Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
|
Dropout
| | Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
|
Pattern
| | Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input ?2 Ch+EXT on WaveRunner 62Xi-A). Each source can be high, low, or don care. The High and Low level can be selected independently. Triggers at start or end of the pa
|
|
| SMART Triggers with Exclusion Technology |
Glitch and Pulse Width
| | Triggers on positive or negative glitches with widths selectable from 500 ps to 20 s or on intermittent faults (subject to bandwidth limit of oscilloscope).
|
Signal or Pattern Interval
| | Triggers on intervals selectable between 1 ns and 20 s.
|
Timeout (State/Edge Qualified)
| | Triggers on any source if a given state (or transition edge) has occurred on another source. Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
|
Runt
| | Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 s.
|
Slew Rate
| | Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 s.
|
Exclusion Triggering
| | Trigger on intermittent faults by specifying the normal width or period.
|
|
| Color Waveform Display |
Type
| | Color 10.4" flat-panel TFT-LCD with high resolution touch screen
|
Resolution
| | SVGA; 800 x 600 pixels; maximum external monitor output resolution of 2048 x 1536 pixels
|
Number of traces
| | Display a maximum of 8 traces. Simultaneously display channel, zoom, memory, and math traces.
|
Grid Styles
| | Auto, Single, Dual, Quad, Octal, XY, Single + XY, Dual + XY
|
Waveform Representation
| | Sample dots joined or dots only in real-time mode
|
|
| Internal Waveform Memory |
Internal Waveform Memory
| | M1, M2, M3, M4 Internal Waveform Memory (store full-length waveform with 16 bits/data point) or store to any number of files limited only by data storage media.
|
|
| WaveStream?Fast Viewing Mode |
Intensity
| | 256 Intensity Levels, 1?00% adjustable via front panel control
|
Number of Channels
| | up to 4 simultaneously
|
Max Sampling Rate
| | 5 GS/s (10 GS/s for WaveRunner 62Xi-A, 64Xi-A, 104Xi-A, 204Xi-A in interleaved mode)
|
Waveforms
| | up to 8000 waveforms/second
|
Operation
| | Front panel toggle between normal real-time mode and LeCroy WaveStream Fast Viewing mode
|
|
| Automatic Setup |
Auto Setup
| | Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals.
|
Vertical Find Scale
| | Automatically sets the vertical sensitivity and offset for the selected channels to display a waveform with maximum dynamic range.
|
|
| Probes |
Probe System: ProBus
| | Automatically detects and supports a variety of compatible probes.
|
Scale Factors
| | Automatically or manually selected, depending on probe used
|
|
| Setup and Waveform Storage |
Front Panel and Instrument Status
| | Store to the internal hard drive, over the network, or to a USB-connected peripheral device.
|
|
| Zoom Expansion Traces |
Zoom Expansion Traces
| | Display up to 4 Zoom/Math traces with 16 bits/data point
|
|
| Interface |
Remote Control
| | Via Windows Automation, or via LeCroy Remote Command Set
|
GPIB Port (optional)
| | Supports IEEE ?488.2
|
Ethernet Port
| | 10/100/1000Base-T Ethernet interface (RJ-45 connector)
|
USB Ports
| | 5 USB 2.0 ports (one on front of instrument) supports Windows-compatible devices.
|
External Monitor Port
| | Standard 15-pin D-Type SVGA-compatible DB-15; connect a second monitor to use extended desktop display mode with XGA resolution.
|
Serial Port
| | DB-9 RS-232 port (not for remote oscilloscope control)
|
|
| Auxiliary Input |
Signal Types
| | Selected from External Trigger or External Clock input on front panel
|
Coupling
| | 50 Ω: DC, 1 MΩ: AC, DC, GND
|
Maximum Input Voltage
| | 50 Ω: 5 Vrms, 1 MΩ: 250 V max. (DC + Peak AC = 5 kHz)
|
|
| Auxiliary Output |
Signal Types
| | Trigger Enabled, Trigger Output. Pass/Fail, or Off
|
Output Level
| | TTL, ?.3 V
|
Calibrator Signal
| | Output available on front panel connector provides a variety of signals for probe calibration and compensation.
|
|
| General |
Auto Calibration
| | Ensures specified DC and timing accuracy is maintained for 1 year minimum.
|
Power Requirements
| | 90?64 Vrms at 50/60 Hz; 115 Vrms (?0%) at 400 Hz, Automatic AC Voltage Selection Installation Category: 300V CAT II; Max. Power Consumption: 340 VA/340 W; 290 VA/290 W for WaveRunner 62Xi-A
|
|
| Environmental and Safety |
Temperature (Operating)
| | +5 蚓 to +40 蚓
|
Temperature (Non-Operating)
| | -20 蚓 to +60 蚓
|
Humidity (Operating)
| | Maximum relative humidity 80% for temperatures up to 31 蚓 decreasing linearly to 50% relative humidity at 40 蚓
|
Humidity (Non-Operating)
| | 5% to 95% RH (non-condensing) as tested per MIL-PRF-28800F
|
Altitude (Operating)
| | Operating Up to 2,000 m
|
Altitude (Non-Operating)
| | Non-Operating 12,190 m
|
|
| Physical Dimensions |
Dimensions (HWD)
| | 260 mm x 340 mm x 152 mm Excluding accessories and projections (10.25" x 13.4" x 6")
|
Net Weight
| | 6.95 kg. (15.5 lbs.)
|
|
| Certifications |
Certifications
| | CE Compliant, UL and cUL listed; Conforms to EN 61326, EN 61010-1, UL 61010-1 2nd Edition, and CSA C22.2 No. 61010-1-04.
|
|
| Warranty and Service |
Warranty and Service
| | 3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, calibration, and customization services.
|
点击图片查看原图
