| 类型:数字示波器 | 品牌:Lecroy | 型号:9354A/ |
| 通道数:4 | 显示模式:彩色 | 最大输入:220(V) |
| 电源电压:220(V) | 重量:10(kg) |


产品详情
数字存储示波器 LeCroy 9354AL/9354TM厂家:美国力科 ( 21x37x41cm,13kg)
500M带宽,4通道采样率最高可达2 GS/s9354AL可达8M存储深度,9354TM可达2M存储深度Innovative Peak Detect ModeFully programmable via GPIB and RS-232-CAutomatic PASS/FAIL testingAdvanced Signal ProcessingInternal High Resolution GraphicsGlitch, Pattern, Qualified, Interval, Dropout and Video Triggers8-bit vertical resolution, 11 with ERES optionDOS Compatible Floppy Disk, PCMCIA potable hard drive and Memory Card options采集系统
带宽(-3 dB):DC to 500 MHzNo. of Channels:4 CHNo. of Digitizers:4 CH最大采样率:2 GS/s采集存储器:9354AL可达8 M,9354TM可达2M.灵敏度:2 mV/div to 5 V/div, fully variable.Scale factors:A wide choice of over 12 probe attenuation factors are selectable.Offset Range:2.0 - 9.9 mV/div:± 120 mV10.0 - 199 mV/div:± 1.2 V
0.2 - 5.0 V/div:± 24 V
±20 V across the whole sensitivity range when using the AP 020 FET probe.DC Accuracy:< or equal to±2% full scale.垂直分解度:8 bits.带宽限幅器:30 MHz输入耦合:AC, DC, GND.输入阻抗:1 M Ohm//14 pF or 50 Ohms ± 1%.最大输入:
1 M Ohm:250 V (DC+peak AC < or equal to 10 kHz)
50 Ohms:± 5 V DC (500 mW) or 5 V RMS
时基系统
Timebases:Main and up to 4 Zoom Traces.Time/Div Range:1 ns/div to 1000 s/div.Clock Accuracy:< or equal to 10 ppmInterpolator resolution:10 psRoll Mode:Ranges 500 ms to 1,000 s/div.For > 50k points:10 s to 1,000 s/div.External Clock:< or equal to 100 MHz on EXT input with ECL, TTL or zero crossing levels up to 500 MHz with option 935XA-CKTRIG.触发系统
Trigger Modes:Normal, Auto, Single.Trigger Sources:CH1, CH2, Line, Ext, Ext/10 (9354:CH3, CH4), Slope, Level and Coupling for each can be set independently.Slope:Positive, Negative.Coupling:AC, DC, HF, LFREJ, HFREJ.Pre-trigger recording:0 to 100% of full scale (adjustable in 0.1 div increments).Post-trigger delay:0 to 10,000 divisions (adjustable in 0.01% increments).Holdoff by time:10 ns to 20 s.Holdoff by events:0 to 99,999,999 events.Trigger Bandwidth:Up to 500 MHz using HF coupling.Internal Trigger Sensitivity Range:± 5 div.EXT Trigger Max Input:1 M Ohm//15 pF:250 V (DC+peak AC < or equal to 10 kHz)
50 Ohms ± 1%:± 5 V DC (500 mW) or 5 V RMSEXT Trigger Range:±0.5 V (±5 V with Ext/10)仪器保证:
我们的大多数设备在装运之前均经过严格的质量检测与校验。也可申请国家计量证书。
公司联系方式
- 深圳市嘉惠捷科技有限公司采购部 [加为商友]

- 联系人王海涛(先生) 总经理
- 地区广东-深圳市
- 地址广东省深圳市南山区西丽镇牛成路221号8楼












